Technology

More than 95% of our products power supply models are protected by potting glue, so that if the waterproof structure of the luminaire is damaged at the installation site and water enters the luminaire, the power supply module will not be damaged by water.

More than 80% of our underground lights and pool lights use back locking the screws, before locking the screws, we use pneumatic press to hold the cover and the body of the light, so that the cover combined with the body of the light when the pressure remains the same, and then lock the screws to ensure 100% waterproof.

Printer⇒Brushboard table⇒Laminator⇒Reflow soldering⇒Cutter⇒QC inspection

Insist on hand polishing
When the parts cannot be polished by machine, we will use hand polishing. Although it will cost a lot of labor, we insist on this step to ensure that all materials to be baked are smooth and flat, as well as the adhesion and beauty after baking.

Brushing and polishing treatment
The surface of the stainless steel cover is brushed with a water-brushed finish, which gives the surface a fine texture and enhances efficiency.

Polished and brushed.

Polishing treatment
The surface cover or lamp body is polished to remove surface burrs and make the surface smooth.

Mold smoothing process
After the 4 stages of machining and sparking machine are completed, the tooling is then smoothly finished by hand to achieve the required precision.

Electrical Discharge Machining is a kind of machining equipment, mainly used for EDM. It is widely used in the manufacture of various metal molds and mechanical equipment. It is a special processing method that uses the electrical discharge generated by the pulsed discharge between the two poles immersed in the working fluid to etch out the conductive material, also known as discharge machining or electro-etching machining. It is mainly used for tools and parts with complex shaped holes and cavities; processing various conductive materials such as carbide and hardened steel; processing deep and thin holes, shaped holes, deep grooves, narrow slits and cutting sheets; processing various tools such as forming tools, sample plates and threaded ring gauges.

Tension hydraulic presses can also be used for straightening, pressing, packing, block pressing and plate pressing. It can also be used for the pressing process of shaft parts, the calibration of profiles, buckling, pressing and assembling process, as well as the bending, debating, shaping, embossing, sleeving, stretching and pressing process of plastic materials, such as punching, bending, flanging and stretching, etc. It can also be engaged in the correction, pressing and assembling, plastic products and powder products pressing and forming operation. Because of its wide range of applications, it is also known as a universal stretching hydraulic press. 4 series pool lights and 5 series pool light projection light body plates are stretched and formed by the stretching and forming machine.